Many people will have a lot of questions after purchasing the WEDM products, especially those novices who are the first to buy them and don't know how to use them. They don't know much about the requirements for the working environment, what to pay attention to when using them, and what to do to better prolong the service life of the equipment. Today, Xiaobian will give you a specific introduction.

1. Space size

Meet the space size requirements of medium wire cutting machine.

2. Load-bearing requirements of installation site

Pay special attention to the choice of installation places, and be sure to choose places that can better bear the weight of machine tools.

3. There should be no vibration at the installation site.

Choose a place where there is no vibration. WEDM machine tool can be said to be a kind of processing equipment with high precision. If there is vibration, it will easily cause great damage to the equipment. Naturally, it will also affect the processing precision of the equipment, shorten the service life of the machine, and even cause the machine to be scrapped.

4, can't install in dusty environment.

It is important to choose a dust-free place, so as to avoid a large number of flowing passages. The dust in the air of the cutting machine will cause serious damage to the internal parts of the machine, which will naturally affect the service life.

What we need to know is that this kind of equipment is generally controlled by computers. The disks used by computers have strict requirements for dust in the air, which I believe is easy for everyone to understand. If the disks in computers get into dust, the disks will be damaged, and so will the hard disks.

At the same time, there will be some more heat in the discharger itself, so it is important to ventilate the electrical cabinet frequently. If there is a large amount of dust in the environment, it will easily collect on the electrical components, resulting in poor heat dissipation and burnout of the circuit board.

At the same time, when installing the WEDM machine tool, it is important to choose the place where the temperature change is relatively small. At the same time, it is also important not to let the sunlight directly shine on the machine, nor let the equipment close to the place where the heat flow occurs. For these high-precision parts, it is necessary to process them at a constant temperature, usually room temperature 20C.